English – ASRock P67 Pro User Manual
Page 10
10
ASRock P67 Pro Motherboard
English
10.
SmartView, a new function of internet browser, is the smart start page for 
IE that combines your most visited web sites, your history, your Facebook 
friends and your real-time newsfeed into an enhanced view for a more 
personal Internet experience. ASRock motherboards are exclusively 
equipped with the SmartView utility that helps you keep in touch with 
friends on-the-go. To use SmartView feature, please make sure your 
OS version is Windows
®
7 / 7 64 bit / Vista
TM
/ Vista
TM
64 bit, and your
browser version is IE8.
ASRock website: http://www.asrock.com/Feature/
SmartView/index.asp
11. Although this motherboard offers stepless control, it is not recommended
to perform over-clocking. Frequencies other than the recommended CPU 
bus frequencies may cause the instability of the system or damage the 
CPU. 
12. While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the 
motherboard functions properly and unplug the power cord, then plug it 
back again. To improve heat dissipation, remember to spray thermal 
grease between the CPU and the heatsink when you install the PC sys-
tem.
13. Combo Cooler Option (C.C.O.) provides the fl exible option to adopt three
different CPU cooler types, Socket LGA 775, LGA 1155 and LGA 1156. 
Please be noticed that not all the 775 and 1156 CPU Fan can be used. 
14. EuP, stands for Energy Using Product, was a provision regulated by Eu-
ropean Union to defi ne the power consumption for the completed system. 
According to EuP, the total AC power of the completed system shall be 
under 1.00W in off mode condition. To meet EuP standard, an EuP ready 
motherboard and an EuP ready power supply are required. According to 
Intel’s suggestion, the EuP ready power supply must meet the standard 
of 5v standby power effi ciency is higher than 50% under 100 mA current 
consumption. For EuP ready power supply selection, we recommend you 
checking with the power supply manufacturer for more details.