Sony SLV-SE10EE - Manual (Page 10)

Getting Started 10
Step 4
Tuning your TV to the VCR
1
Press I /u ON/STANDBY to turn on the VCR.
2
Press RF CHANNEL on the VCR lightly.
The factory-preset RF channel appears in the display window.
The VCR signal is output through this channel to the TV.
3
Turn on your TV and select a programme position for the VCR
picture.
This programme position will now be referred to as the video
channel.
4
Press RF CHANNEL.
The TV system appears in the display window.
I/u ON/STANDBY
PROGRAM +/– RF CHANNEL
ON/STANDBY
RF CHANNEL
RF CHANNEL