ASRock Z68 Extreme7 Gen3 - Manual (Page 28)

28
ASRock Z68 Extreme7 Gen3 Motherboard
English
2.6.1.2 Installing Three CrossFireX TM -Ready Graphics Cards
Step 1. Install one Radeon graphics card to PCIE1 slot. For the proper installation
procedures, please refer to section “Expansion Slots”.
Step 2. Install one Radeon graphics card to PCIE4 slot. For the proper installation
procedures, please refer to section “Expansion Slots”.
Step 3. Install one Radeon graphics card to PCIE6 slot. For the proper installation
procedures, please refer to section “Expansion Slots”.
Step 4. Use one CrossFire TM Bridge to connect Radeon graphics cards on PCIE1
and PCIE4 slots, and use the other CrossFire TM Bridge to connect Radeon
graphics cards on PCIE4 and PCIE6 slots. (CrossFire TM Bridge is provided
with the graphics card you purchase, not bundled with this motherboard.
Please refer to your graphics card vendor for details.)