ASRock H67M-ITX - Manual (Page 30)

30
ASRock H67M-ITX/HT / H67M-ITX Motherboard
English
2.9 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.
2.10 Installing Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit With
RAID Functions
If you want to install Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit OS on your
SATA / SATAII / SATA3 HDDs with RAID functions, please follow below procedures
according to the OS you install.
RAID mode is not supported under Windows ® XP / XP 64-bit OS.
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY Advanced screen SATA Confi guration.
B. Set the option “SATA Mode” to [RAID].
STEP 2: Use “RAID Installation Guide” to set RAID confi guration.
Before you start to confi gure the RAID function, you need to check the installation
guide in the Support CD for proper confi guration. Please refer to the document in
the Support CD, “Guide to SATA Hard Disks Installation and RAID Confi guration”,
which is located in the folder at the following path:
.. \ RAID Installation Guide
STEP 3: Install Windows
® 7 / 7 64-bit / Vista TM / Vista TM 64-bit OS on your
system.
After the installation of Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit OS, if you want to
manage RAID functions, you are allowed to use both “RAID Installation Guide” and “Intel
Rapid Storage Information” for RAID confi guration. Please refer to the document in the
Support CD, “Guide to SATA Hard Disks Installation and RAID Confi guration”, which is lo-
cated in the folder at the following path: .. \ RAID Installation Guide and the document in
the support CD, “Guide to Intel Rapid Storage”, which is located in the folder at the follow-
ing path: .. \ Intel Rapid Storage Information
If you want to use “Intel Rapid Storage” in Windows ® environment,
please install “SATAII driver” from the Support CD again so that “Intel
Rapid Storage” will be installed to your system as well.