ASRock Z87 Extreme9__ac - Manual (Page 31)

28 29
English
Z87 Extreme9/ac
Power LED Header
(3-pin PLED1)
(see p.1, No. 23) Please connect the chassis
power LED to this header
to indicate the system’s
power status.
Serial ATA3 Connectors
(SATA3_0_1:
see p.1, No. 14)
(SATA3_2_3:
see p.1, No. 15)
(SATA3_4_5:
see p.1, No. 16)
(SATA3_A1_A2:
see p.1, No. 12)
(SATA3_A3_A4:
see p.1, No. 13) These ten SATA3
connectors support SATA
data cables for internal
storage devices with up
to 6.0 Gb/s data transfer
rate. If the eSATA port
on the rear I/O has been
connected, the internal
SATA3_A4 will not
function.
To minimize the boot
time, use Intel® Z87 SATA
ports (SATA3_0) for your
bootable devices.
USB 2.0 Headers
(9-pin USB2_3)
(see p.1, No. 28)
(9-pin USB4_5)
(see p.1, No. 27)
(9-pin USB6_7)
(see p.1, No. 26)
(USB8)
(see p.1, No. 25)
Besides two USB 2.0 ports
on the I/O panel, there
are three headers and one
port on this motherboard.
Each USB 2.0 header can
support two ports.
1
PLED+
PLED+
PLED-
SA
TA3_0_1
SA
TA3_4_5
SA
TA3_2_3
SA
TA3_A1_A2
SA
TA3_A3_A4
DUMMY
GND
GND
P+
P-
USB_PWR
P+
P-
USB_PWR
1