ASRock P67 Pro3 SE - Manual (Page 25)

25
ASRock P67 Pro3 SE Motherboard
English
2.9 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
Serial ATAII Connectors These four Serial ATAII (SATAII)
(SATA2_2: see p.2, No. 8) connectors support SATA data
(SATA2_3: see p.2, No. 11) cables for internal storage
(SATA2_4: see p.2, No. 7) devices. The current SATAII
(SATA2_5: see p.2, No. 12) interface allows up to 3.0 Gb/s
data transfer rate.
Serial ATA3 Connectors These two Serial ATA3 (SATA3)
(SATA3_0: see p.2, No. 9) connectors support SATA data
(SATA3_1: see p.2, No. 10) cables for internal storage
devices. The current SATA3
interface allows up to 6.0 Gb/s
data transfer rate.
Serial ATA (SATA) Either end of the SATA data
Data Cable cable can be connected to the
(Optional) SATA / SATAII / SATA3 hard
disk or the SATAII / SATA3
connector on this motherboard.
SATA2_4 SATA2_2
SATA2_5 SATA2_3
USB 2.0 Headers Besides six default USB 2.0
(9-pin USB8_9) ports on the I/O panel, there
(see p.2 No. 22) are three USB 2.0 headers on
this motherboard. Each
USB 2.0 header can support
two USB 2.0 ports.
(9-pin USB10_11)
(see p.2 No. 21)
(9-pin USB12_13)
(see p.2 No. 20)
1
DUMMY
GND
P+13
P-13
USB_PWR
USB_PWR
GND
P+12
P-12
1
USB_PWR
P-8
GND
DUMMY
USB_PWR
P+8
GND
P-9
P+9
1
USB_PWR
P-10
GND
DUMMY
USB_PWR
P+10
GND
P-11
P+11
SATA3_0
SATA3_1