Binatone GK-1231 - Manual (Page 6)

6
Do not take the electric cord out of the socket during operation
of the appliance. You should first turn it off.
After using the appliance let it cool for a few minutes. After
that you can boil water in it again.
DESCRIPTION OF THE
APPLIANCE
Picture A:
1. Locking lid with hinge
2. Button to open the lid
3. Filter
4. Water level gauge
5. Body
6. On/off button
7. Indicator light
8. Cord storage base
BEFORE USE
Remove all packing materials from appliance;
make sure that there are no foreign items in it.
Wash internal surface of kettle with warm
soapy water, rinse carefully and wipe dry. In
case of unusual odor fill the kettle up to a maxi-
mum level with vinegar solution (1 element of 9
% vinegar per 20 elements of water), let the
kettle soak for an hour. Then wash out the kettle with tap water,
boil water in the kettle and pour it out.
OPERATING INSTRUCTIONS
1. Put the kettle on a dry horizontal surface.
2. Take the kettle from the base (8), open the
lid (1), and fill the kettle with water.
3. Make sure that the water level is between
the maximum and minimum allowed levels
(4). Do not boil dry.
4. Close the lid (1) and put the kettle on the
base (8).
5. Plug the kettle into a power supply with a voltage matching the
information on the kettle.
6. Push the on/off button (6) to the position «I». The indicator
light will turn on (7), showing that the boiling process has
started.
7. The kettle will automatically shut off when the water reaches
boiling point. If you wish you can turn off the kettle before the
boiling has ended, by pushing the on/off button (6) to the
position «0». While pouring water, incline the kettle carefully
and gradually. Do not forget that there is hot water in the kettle.
8. If the water has cooled down and you want to make it hot
again, simply turn the kettle on again.