Map page – Garmin GPSMAP 135 Sounder User Manual
Page 54
• Change Data Fields?— allows you to specify the data displayed in each data field
used on the map display. The following options are available:
• BRG- bearing to active wpt
• DIS- distance to active wpt
• SOG- speed over ground
• COG- course over ground
• ETE- estimated time enroute • ETA- estimated time of arrival
• XTK- crosstrack error
• VMG- velocity made good
• TRN- turn angle to wpt
• WPT- active wpt name
• DPT- depth
• TMP- temperature
• STW- speed through water
To change a data field:
1. Highlight the ‘Change Data Fields?’ option and press
T
.
2. Move the field highlight to the desired field and press
T
.
3. Select a data field option and press
T
.
•
Restore Defaults?— resets all map page options (except map configuration
options, see pages 41-42) to the factory settings.
• Setup Simulator?— allows you to define simulator speed, course, altitude, depth,
and position values.
See the Getting Started Tour for more on the simulator mode.
SECTION
4
MAP PAGE
Options
44
GPS 135 Rev C 8/4/98 4:18 PM Page 44