Garmin GPS 72 - Manual (Page 45)

43
Introduction
43
Reference
‘ Backlight Timeout’ — Sets the time that the Backlight will remain on once activated.
The options are ‘Stays On’, ‘15 Seconds’, ‘30 Seconds’, ‘1 Minute’ and ‘2 Minutes’.
‘Beeper’ — This setting determines when the Beeper is used. The options are ‘Key and
Message’, ‘Message Only’, and ‘Off’.
‘ Language’ — Select from seven languages, English, German, French, Italian, Spanish,
Swedish, and Norwegian.
Setup Menu — ‘ Time’ Tab
The ‘Time’ Tab contains settings for Time Format, Time Zone, Daylight Savings Time,
Current Date, and Current Time. To change a setting, highlight the fi eld then press
ENTER. Make your selection then press ENTER to activate the selection.
‘ Time Format’ — The GPS 72 can display time in a 12 or 24 hour format.
‘ Time Zone’ — The ‘Time Zone’ setting has nine options, Atlantic, Eastern, Central,
Mountain, Pacifi c, Alaska, Hawaii, Samoa, and Other. If you choose ‘Other’ a new fi eld
“UTC Offset” will be displayed. Enter the correct offset for your Time Zone. You can
fi nd a chart with UTC Offsets in Appendix C.
‘ Daylight Savings Time’ — Has three options, ‘Yes’, ‘No’, and ‘Auto’. If you select ‘Auto’,
the unit will automatically determine when Daylight Savings Time should be displayed.
If you select ‘Yes’, Daylight Savings Time for the current location will be displayed.
If you select ‘No’, Daylight Savings Time will not be displayed. If you have ‘Other’
selected in the ‘Time Zone’ fi eld, this option will not be available and Daylight Savings
Time will be off.
‘ Current Date’ — Shows current date that is determined by the unit.
‘ Current Time’ — This fi eld shows the time at the current location. This fi eld refl ects any
settings in the ‘Daylight Savings Time’ fi eld, and is not accessible by the user.
Setup Menu — ‘Time’ Tab
Main Menu
Time Tab
190-00294-00_0B.indd 43 9/25/2002, 2:37:29 PM