Using fm traffic, Led blink codes – Garmin nuvi 900T User Manual

Page 44

Advertising
background image



nüvi 900 Series Owner’s Manual

Using FM Traffic

Using FM Traffic

The traffic receiver is included in some

nüvi packages. The FM traffic receiver is

integrated in the vehicle power cable.
Use an FM TMC (Traffic Message

Channel) traffic receiver to receive

traffic information that is broadcast over

the FM Radio Data System.
For information about FM traffic

receivers and coverage areas, see

www.garmin.com/traffic

.

noTe: Garmin is not responsible for

the accuracy of the traffic information.

The FM traffic receiver receives

signals from the traffic service

provider and displays that information

on your nüvi.

noTe: The FM traffic receiver and

the nüvi must be in data range of an

FM station transmitting TMC data to

receive traffic information.

To power connector

on nüvi cradle

To power outlet

in vehicle

Power

LED Status

LED

Antenna

(suction cups

not shown)

LED Blink Codes

The green Power LED lights when

connected to external power. The Status

LED indicates the signal reception:

Yellow dot-dash flashes

determining which country you are

currently in.
Yellow solid—searching for signal.
red solid—momentary sync loss.
green solid—normal traffic data.



Advertising