Garmin StreetPilot III - Manual (Page 10)

10
Quick Start Trip Information Page
If the Trip Information Page is not currently displayed, press PAGE (repeatedly) until
the Trip Information Page appears.
The last of the main pages is the Trip Information Page. On long trips, you will fi nd the Trip
Information Page very useful. This page indicates your current speed and many helpful statistics about
your trip including:
Driving Status Information— Displayed at the top of the page. Shows the next intersection (the
crossroad name) or interstate exit if one is approaching. Otherwise, it shows the road you are on.
Speed— This is the current vehicle speed.
Odometer— A running total of distance traveled, based upon the distance between second-by-
second location readings, since the Trip Computer was last reset.
Current Direction and Time— Displayed to the right of the speed and odometer.
Power/Battery— Displayed to the left of the odometer. If the StreetPilot III is using internal AA
batteries, a battery strength bar is shown (and labeled “Battery Power”). Notice the shaded area of the bar.
The farther right the shading extends, the more battery power remains. When operating on batteries, the
bar and the label turn red when power is low (20% or less). When operating from an external power
source, a power plug symbol is shown in place of the bar (and labeled “External Power”).
Battery power is shown in the upper left corner of the
Trip Information Page. When it turns red, its time to
replace the batteries. Trip Speed
Figures
Trip Timer Figures
Current Driving
Direction and Time
Driving Instructions
Battery Level Indicator
You can reset the trip information by pressing MENU
and selecting ‘Reset Trip Computer’.
Trip Information Page
Speed Odometer
190-00256-11_0A.indd 3/5/02, 10:09 AM 10