Changing the fuse in the vehicle power cable, Removing the device, cradle, and mount – Garmin nuvi 2585TV User Manual

Page 40

Advertising
background image

40

nüvi 2585TV Owner’s Manual

2

Wipe the device dry.

Cleaning the Touchscreen

1

Use a soft, clean, lint-free cloth.

2

If necessary, use water, isopropyl alcohol, or

eyeglass lens cleaner.

3

Apply the liquid to the cloth.

4

Gently wipe the screen with the cloth.

Avoiding Theft

• Remove the device and mount from sight

when not in use.

• Remove the residue left on the windshield by

the suction cup.

• Do not keep your unit in the glove

compartment.

Register your device at

http://my.garmin.com

.

Extending the Battery Life

• Keep your device away from extreme

temperatures.

Decrease the screen brightness (

page 6

).

• Do not leave your device in direct sunlight.
Decrease the volume (

page 6

).

• Disable Bluetooth (

page 37

).

Changing the Fuse in the Vehicle

Power Cable

noTiCe

When replacing the fuse, do not lose any of the

small pieces and make sure they are put back in

the proper position. The vehicle power cable

does not work unless it is assembled correctly.
If your device does not charge in your vehicle, you

may need to replace the fuse located at the tip of

the vehicle adapter.

1

Unscrew the end piece.
TIP: You may need to use a coin to remove the

end piece.

2

Remove the end piece, the silver tip, and the

fuse.

3

Install an 2 A fast-blow fuse.

4

Place the silver tip in the end piece.

5

Screw the end piece back into the vehicle

power cable.

Removing the Device, Cradle, and

Mount

Removing the Device from the Cradle

1

Press the tab on the bottom of the cradle.

2

Tilt the device forward.

Removing the Cradle from the Mount

1

Turn the cradle to the right or left.

Advertising