System overview – Garmin G1000 Socata TBM 850 User Manual
Page 53
190-00709-02 Rev. B
Garmin G1000 Pilot’s Guide for the Socata TBM 850
39
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EAS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
4)
Turn the small FMS Knob clockwise to turn the airspace alert ON or counterclockwise to turn the alert OFF.
5)
Press the FMS Knob to deactivate the cursor.
Changing the arrival alert trigger distance:
1)
Use the FMS Knob to select the AUX - System Setup Page.
2)
Press the FMS Knob momentarily to activate the flashing cursor.
3)
Turn the large FMS Knob to highlight the distance field in the Arrival Alert Box.
4)
Use the FMS Knob to enter a trigger distance and press the ENT Key.
5)
Press the FMS Knob to deactivate the cursor.
a
UDiO
a
leRts
The Audio Alert Box on the System Setup Page allows the audio alert voice to be set to male or female.
To change the audio alert voice:
1) While on the System Setup Page, press the FMS Knob momentarily to activate the flashing cursor.
2) Turn the large FMS Knob to highlight the voice in the Audio Alert Box.
3) Turn the small FMS Knob to display and highlight the desired voice and press the ENT Key.
F
light
D
iRectOR
Not pilot selectable.
P
age
n
avigatiOn
The large FMS Knob displays the Page Group Tabs and navigates through the tabs. The small FMS Knob
navigates through the pages listed within a specific group. The number of clicks it takes to display the
Page Group Tabs and change to the next tab can be controlled from the Page Navigation box on the AUX
- System Setup Page.
OFF – Displays the Page Group Tabs with one click of the large FMS Knob.
ON – Displays the Page Group Tabs and navigates to the next tab with one click of the large FMS Knob.
The pilot can select, from the AUX - System Setup Page, the amount of time the Page Group Tabs are
displayed (in the lower right corner of the MFD). The timeout can range from two to ten seconds.
Selecting page navigation settings:
1)
Use the FMS Knob to select the AUX - System Setup Page.
2)
Press the FMS Knob momentarily to activate the flashing cursor.
3)
Turn the large FMS Knob to highlight the ‘Change On 1st Click’ field in the Page Navigation Box.
4)
Turn the small FMS Knob to select ‘OFF’ or ‘ON’.
5)
Turn the large FMS Knob to highlight the ‘Timeout Seconds’ field in the Page navigation Box.
6)
Turn the small FMS Knob to select the desired number of seconds
7)
Press the FMS Knob momentarily to remove the flashing cursor.