Garmin StreetPilot c310 - Manual (Page 31)

Garmin © 2005 27 c310 Owner’s Manual
A
PPENDIX
Using an SD Card
The SD card slot is located on the side of the c310. To insert
or remove the card, press it in until it clicks.
Purchasing Additional MapSource Maps
You can purchase additional MapSource map data from
Garmin and download the maps to your SD card.Follow the
instructions that came with the new map data to properly
install the maps to your computer and c310. In order to enable additional maps, you need your unit ID
(see
page 18 ) and serial number (see page i ).
Using the USB Drivers and Cable
Use the enclosed installation disk to install the USB drivers onto your computer. These drivers must be
installed before you connect the USB cable to your computer.
Use the Garmin USB cable provided to connect your c310 to your computer. This is necessary when
updating your map data, updating the c310 software, or loading additional maps.
Plug the small end of the USB cable into the connector above the power button. Plug the other end of the
cable into an available USB connector on your computer.
������
�
������
�