Garmin GPSMAP 76CS - Manual (Page 77)

67
GPSmap 76CS
Heading Setup
The Heading Setup Page allows you to specify the type of heading
display and the type of North Reference used to calculate your heading.
Unless you have a working knowledge of Headings and North Referenc-
ing, it is recommended that you use the default values.
To use the Heading Setup feature:
1. Access the Heading Setup Page.
2. Highlight the Display fi eld, press ENTER and select from Cardi-
nal Letters, Degrees or Mils to display the heading value.
3. Highlight the North Reference fi eld, press ENTER and select
from True North, Magnetic North, Grid North, or User Grid North.
4. Select speed and time delay for electronic compass switching.
See page 15.
Calibration Setup
The Calibration Setup Page allows you to calibrate both the Compass
and Altimeter for increased accuracy in navigation.
To calibrate the Compass:
1. Access the Calibration Setup Page which displays a “Which
sensor would you like to calibrate?” message.
2. Highlight the Compass button and press ENTER to display the
Compass Calibration Page. Follow instructions on page 16.
To calibrate the Altimeter:
Select Altimeter and press ENTER to display the Altimeter
Calibration Page and follow instructions on pages 25 and 68.
Calibration Setup
GPS Navigation
Heading Setup
Display
Options
North
Reference
Options
Time Delay
Options
Heading Setup Page
Calibration Setup Page
GPSmap 76CS Owner's Guide copy.indd 67 GPSmap 76CS Owner's Guide copy.indd 67 10/8/2004 8:28:26 AM 10/8/2004 8:28:26 AM