Garmin GPSMAP 76 - Manual (Page 35)

GPSMAP 76 Owner’s Manual 
M
AIn
p
AGes
> M
Ap
p
AGe
Map Tab
The Map tab contains settings for the Basemap,
MapSource, Lat Lon Grids, and Grid Labels.
Basemap—allows you to turn the Basemap data On or
Off. Selecting Off no longer displays the Basemap.
MapSource—is only available if Mapsource CD data
has been loaded into the unit. If MapSource data is
available, you can choose whether to display the data
on the map by selecting either On or Off. By selecting
Off, the MapSource data is not be displayed on the
Map page.
Lat Lon Grid—is a latitude longitude grid displayed
in smaller increments as the Zoom Range on the Map is
decreased. The Zoom setting for this option determines
when the grids begin displaying on the map. The
Auto setting does not display a Lat Lon Grid with the
Basemap or MapSource options set to On.
Grid Labels—displays the coordinates on the Lat
Lon grid on the map. The Lat Lon Grid must be set to
Auto or a Zoom Range for the Grid Labels to appear.
The Auto setting does not display Grid Labels if the
Basemap or MapSource options set to On.
Waypoint Tab
The Waypoint tab contains the Waypoint and Active
Route Waypoint settings. Each of the options has a
Text and Zoom setting.
Waypoints—sets the display parameters for
all waypoints.
Active Route Waypoint—This option sets the display
parameters for waypoints in an Active Route. For
example, if you have selected Small as the text option
for all waypoints, but selected Large as the setting for
Active Route Waypoints, the waypoints included in
an Active Route are displayed with large text on the
Map page, while the waypoints around the route are
displayed as small.