Garmin GPSMAP 198C Sounder - Manual (Page 38)

32 GPSMAP 198C Sounder Owner’s Manual
M
AIN
P
AGES
> M
AP
P
AGE
You can also merge the four medium default data fields to a single,
large field for better readability or you can split any or all of the
default data fields to show four small data fields.
Single, large data
field
Default, medium
fields
Split, small
fields
Measure Distance—measures the bearing and distance between
any two points on the Map Page.
To measure the bearing/distance between two points:
1. Highlight Measure Distance, and press ENTER. An
on-screen pointer labeled ENT REF appears on the Map
Page at your present location.
2. Move the pointer to a reference point (the point that you
want to measure from), and press ENTER.
3. Move the pointer to the end measurement point. The
bearing and distance from the reference point and pointer
coordinates is shown in the data window at the top of the
screen. Press QUIT to finish.
Distance and
Bearing
Map Pointer
Full screen map shown
(with BlueChart data)
Pointer
Coordinates