Garmin MX20 - Manual (Page 67)


Detailed Operation
Flight Plan (FPL) Function
Use the Flight Plan function to view details about your flight plan route. Press the UP/DOWN arrow “smart”
keys to step through the waypoints in your flight plan. Press the
InFo “smart” key to view information
about the waypoint. The Flight Plan Function shows the Current Flight Plan that is active in the connected
navigation source (i.e. GPS receiver). The Current To Waypoint box shows the current leg of the flight plan.
The Current Flight Plan box shows all of the legs of your flight plan with the current leg indicated in magenta.
Listed are each leg with the bearing and distance between the legs. The Current Nav Data box shows the air-
craft current position in latitude and longitude, ground speed, and track. In the lower right corner information
for the current waypoint is displayed in the Waypoint Info box. The Nearest Center frequency is shown just
above the flight plan. The Flight Plan function does not have any options.
Runway diagrams of airports will be displayed in the same orientation as the main map (i.e., North Up, Track
Up, or DTK Up).
. Press the FPL functon smart key to reach the Flght Plan functon.
. Press the Up or Down functon smart keys to move up and down the flght plan lst n the Current
Flght Plan wndow. The detals for the selected waypont are shown n the Waypont Info wndow on
the rght sde of the screen.
. Each press the Info functon smart key wll step through the avalable pages of Waypont Informaton.
Flight Plan
Flight Plan Information (UAO selected)
Flight Plan Information (PDX selected)