Garmin GPSMAP 180 - Manual (Page 47)

A B
The MARK key may also be used on the Map Page to mark the cursor position or
an on-screen navaid. To mark a navaid, select the desired navaid with the cursor.
The GPSMAP 180 will use the navaid text shown on the cartography as the default
comment.
To mark the cursor or navaid position with the M key:
1. Use the R keypad to move the cursor to the desired position or navaid.
2. Press the M key.
3. Highlight the ‘Use Map Posn?’ or the ‘Use NAVAID Posn?’ option and press
T .
4. To accept the waypoint with the default name, symbol, and comment (the date and time of
creation), press T to confirm the ‘Done?’ prompt.
5. To enter a different name, symbol or comment, highlight the appropriate field and press
the T key.
6. After entering and confirming your changes, move the field highlight back to the ‘Done?’
prompt and press T .
35
A. To create a waypoint at an on-screen navaid,
move the cursor over the desired navaid.
B. Press the MARK key and select the ‘Use Navaid
Posn?’ option. Press EDIT/ENTER to finish.
SECTION
6
WAYPOINTS
Using the MARK Key
Waypoint Name Field Waypoint Symbol Field
Waypoint Comment Field