Garmin GNS 430 - Manual (Page 53)

GNS 430(A) Pilot’s Guide and Reference 190-00140-00 Rev. P
SECTION 3
NAV PAGES
3-19
3.7 POSITION PAGE
The Position Page displays the present position (by
default, in latitude and longitude) and altitude. The
Position Page (Figure 3-39) also displays the current
track, ground speed, time, and a reference waypoint field.
These fields are user-selectable to configure the page to
the pilot’s own preferences and current navigation needs.
Figure 3-39 Position Page
Present Position
Reference
Waypoint Field
Graphic Track
Indicator
User-selectable
Data Fields
Number of Pages in
Current Page Group
Position of
Current Page
within Current
Page Group
Current
Page Group
The graphic track indicator at the top of the page
indicates the direction the aircraft is heading, or track, only
when moving. The graphic track indicator and the TRK
indication directly below it provide the same information.
Use the graphic track indicator for quick at-a-glance
ground track information. Directly below are three user-
selectable fields, which by default display track, ground
speed, and altitude. Barometric pressure (BARO) settings
and minimum safe altitude (MSA) can also be displayed in
these fields. MSA is the recommended minimum altitude
within approximately ten miles of the present position.
MSA is calculated from the information contained in the
database and generally takes into account mountains,
buildings, and other permanent features.
NOTE: Do not rely solely on MSA as an absolute
measure of safe altitude. Consult current area
charts and NOTAMs.
To change the user-selectable data fields:
1) Press the MENU Key to display the Position
Page Menu (Figure 3-40).
Figure 3-40 Position Page Menu
2) Turn the large right knob to highlight ‘Change
Fields?’ and press the ENT Key.
3) Turn the large right knob to highlight the data
field to be changed.
4) Turn the small right knob to display the list of
available data items (Figure 3-41). Continue
turning the small right knob to select the
desired data item from the list.
Figure 3-41 Select Field Type Window