Using the mounting bracket – Garmin GPSMAP 640 User Manual

Page 8

Advertising
background image

2 

GPSMAP 620 and GPSMAP 640 Owner’s Manual

Getting Started

CAUTION

The ball-socket adapter on the GPSMAP 620 and GPSMAP 640

is not compatible with Garmin automotive mounts other than the

included mount. Do not mount the device on a windshield.

Notice

When you remove the GPSMAP 620 or GPSMAP 640 from the

marine mounting bracket, dry the metal contacts and use the

attached weather cap to prevent corrosion.

Using the Mounting Bracket

Notice

Do not use the automotive mounting bracket in your boat. The

power connector and speaker assembly are not water resistant, and

therefore unsuitable for marine use. Additionally, do not use the

automotive-mount base in your boat. The automotive-mount base

does not connect to the dashboard using mounting hardware, and

therefore is not stable in marine conditions.
To install the marine mounting bracket in your boat, see the

GPSMAP 620/640 Marine Mount Installation Instructions.
Note: To mount the GPSMAP 620 or GPSMAP 640 into your

boat console, purchase the GPSMAP 600 Series Flush Mount Kit at

www.garmin.com

.

To install the automotive mounting bracket in your car:

1. Place the automotive-mount base on your dashboard, and

press down on each of the four sides. The base bends and

conforms to your dashboard.

2. Snap the mounting bracket onto the automotive-mount arm.
3. Plug the vehicle power cable into a power outlet in your vehicle.

tip: If the bottom surface of the automotive mount slides on the

dashboard due to dust and dirt buildup, wipe it clean using a wet

cloth.

To place the GPSMAP 620 or

GPSMAP 640 in the mounting

bracket:

1. Flip up the locking tab on top of

the mounting bracket.

2. Fit the bottom of the device into

the cradle.

3. Tilt the device back until it

stops.

4. Flip down the locking tab to

hold the device in the mounting

bracket.

To remove the device from the mounting bracket:

1. Flip up the locking tab on top of the mounting bracket.
2. Tilt the device forward, and lift it out of the mounting bracket.

Placing the GPSMAP 620

or GPSMAP 640 in the

Mounting Bracket

Advertising