Garmin nuvi 2580TV - Manual (Page 5)

Getting Started 1
Getting Started

WARNING
See the Important Safety and Product Information
guide in the product box for product warnings and
other important information.
When using your device for the first time,
complete the following tasks.
1 Mount the device ( page 1 ).
2 Register the device ( page 2 ).
3 Check for updates.
• Software updates (
page 2 ).
• Free map update ( page 2 ).
4 Download the full owner’s manual ( page 2 ).
Mounting the Device

WARNING
This product contains a lithium-ion battery. To
prevent the possibility of personal injury or product
damage caused by battery exposure to extreme
heat, remove the device from the vehicle when
exiting or store it out of direct sunlight.
Charge your device as you drive before using it on
battery power.
1 Plug the vehicle power cable into the USB port
➊ on the device.
➊
➋
➌
➍
2 Press the suction cup ➋ to the windshield.
3 While pressing, flip the lever ➌ back toward
the windshield.
4 Snap the mount ➍ onto the suction cup.
5 Fit the bottom of your device into the mount.
6 Tilt your device back until it snaps into place.
7 Plug the other end of the vehicle power cable
into a power outlet in your vehicle.
About myDashboard
Use myDashboard to register your device, check
for software and map updates, access product
manuals and support, and more.