Garmin GPS 72 - Manual (Page 3)

2
Quick Start
Installing the batteries
Installing the batteries:
1. Remove the Battery Cover by turning the D-ring 1/4 turn counter clockwise and pulling the
cover loose.
2. Check the battery polarity with the molded diagram in the battery compartment and install
the batteries inserting the end toward the spring fi rst.
3. Re-install the Battery Cover by reversing step 1.
Turn D-ring 1/4 turn counter-
clockwise and remove cover
Battery Installation
Remove the batteries from your GPS 72 if you don’t expect to
use it for several months. Be sure to observe the proper polarity
when inserting the batteries. Follow the battery manufacturer’s
instructions on the proper care and handling of the batteries.
Please
dispose
of
used
batteries
pr
oper
ly!
Please
dispose
of
used
batteries
pr
oper
ly!
72 QS Guide RevB.indd 2 10/30/2002, 4:00:05 PM