Garmin nuvi 780 - Manual (Page 4)


Step 2: Configure the nüvi
To turn on your nüvi, slide the Power
key to the left. Follow the on-screen
instructions.
Step 3: Acquire Satellites
Go outdoors to an open area, out of garages,
and away from tall buildings. Stop your
vehicle, and turn on the nüvi. Acquiring
satellite signals may take a few minutes.
The
bars indicate GPS satellite
strength. When one bar is green, the nüvi
has acquired satellite signals. Now you can
select a destination and navigate to it.
Step 4: Activate Your MSN ®
Direct Receiver
Your use of the MSN Direct service, as well as your use
of the MSN Direct content delivered to and displayed on
your device, is subject to the MSN Direct Subscription
Agreement, Terms of Use, and Privacy Statement located
at www.msndirect.com . By using and activating your
navigation device, you hereby accept such Subscription
Agreement, Terms of Use and Privacy Statement, and
acknowledge that you are aware of and have had an
opportunity to fully review them at the URL referenced
above.
To receive MSN Direct content, first you
must activate your service (3-months free
service included).
1. Connect the vehicle power cable to your
nüvi and your vehicle’s power outlet.
Turn your vehicle’s key to the ON/ACC
position, if necessary, to power the nüvi.
2. Touch Tools > MSN Direct .
3. Write down the product key.
4. Call (866) 658.7032 or go to
http://garmin.msndirect.com/activate
and follow the directions.
5. Within two days, complete the following
steps:
Connect the vehicle power cable, and
turn the key to ON/ACC.
Make sure you are in an MSN Direct
coverage area (see http://garmin
.msndirect.com/coverage ).
Touch Tools > MSN Direct . If the
Subscription Inactive page appears,
verify that one signal bar is green.
It may take up to 20 minutes for your
subscription to be activated. After it
is activated, the MSN Direct menu is
accessible.
•
•
•