Garmin Rino 655t - Manual (Page 8)

6 Rino 600 Series Owner’s Manual
Getting Started
2. Lift the latch on the cover to
separate the battery compartment.
3. Insert four AA batteries, observing
polarity.
4. Replace the battery cover, and turn
the D-ring clockwise.
5. Update the battery type in the
system settings ( page 40 ).
acquiring Satellite
Signals
It may take 30 to 60 seconds to acquire
signals.
1. Go outdoors to an open area.
2. Turn on the device.
3. Wait while the device searches for
satellites.
A question mark flashes while the
device determines your location.
The GPS bars indicate satellite
strength. When the bars are green, the
device has acquired satellite signals.
Registering Your Device
• Go to http://my.garmin.com .
• Keep the original sales receipt, or a
photocopy, in a safe place.
Turning On the Backlight
The backlight will turn off after a
period of inactivity. To change the
backlight timeout, see page 29 .
• Select .
• Touch the screen.
Alerts and messages also activate the
backlight.