Garmin GPSMAP 60 - Manual (Page 27)

17
GPSmap 60
GPS Navigation
The Mark Waypoint Page
The Mark Waypoint Page allows you to mark and record your cur-
rent (or any other) location as a waypoint and displays a name for that
waypoint and a waypoint symbol. You can mark your current location
from any page on the GPSmap 60.
To mark your current location as a waypoint:
1. Press in and hold the ENTER key until the Mark Waypoint Page
appears.
2. To change the name of the waypoint, use the ROCKER key to
highlight the waypoint name field and press ENTER to display
the on-screen keypad. Use the ROCKER key and ENTER key
to select a name for the waypoint. If you choose a name that
has already been used, a “Waypoint Already Exits” message
will appear. Press ENTER to acknowledge and choose a new
name.
3. To assign an identifying symbol to a waypoint, use the
ROCKER key to highlight the symbol block next to the
waypoint name and press ENTER to display the Symbols Chart.
4. To save the waypoint to the Find Menu Waypoints List, high-
light “OK” and press ENTER.
5. If you do not want to save it as a new waypoint, press the
QUIT key, before pressing any other key, to cancel.
Using Waypoints
MARK
Mark Waypoint Page
Naming a Waypoint
Symbols Chart
Press the
MARK key
to display
the Mark
Waypoint
Page