Section 4 audio panel and cns, 1 overview, Audio panel and cns – Garmin G1000 Mooney M20TN User Manual

Page 101

Advertising
background image

190-00647-02 Rev. A

Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN

87

AUDIO PANEL AND CNS

SY

STEM

O

VER
VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

SECTION 4 AUDIO PANEL AND CNS

4.1 OVERVIEW

The Communication/Navigation/Surveillance (CNS) system includes the Audio Panel, communication radios,

navigation radios, and Mode S transponder. The System Overview Section provides a block diagram description
of the Audio Panel and CNS system interconnection.

CNS operation in Mooney aircraft is performed by the following Line Replaceable Units (LRUs):

• Primary Flight Display (PFD)

• Multifunction Display (MFD)

• Integrated Avionics Unit (2)

• Audio Panel

• Mode S Transponder

The MFD/PFD controls are used to tune the communication transceivers and navigation radios.

The Audio Panel provides the traditional audio selector functions of microphone and receiver audio selection.

The Audio Panel includes an intercom system (ICS) between the pilot, copilot, and passengers, a marker beacon
receiver, and a COM clearance recorder. Ambient noise from the aircraft radios is reduced by a feature called
Master Avionics Squelch (MASQ). When no audio is detected, MASQ processing further reduces the amount of
background noise from the radios.

The Mode S transponder is controlled with softkeys and the FMS Knob located on the Primary Flight Display

(PFD). The Transponder Data Box is located to the left of the System Time Box. The data box displays the active
four-digit code, mode, and reply status (Figure 4-1).

Advertising
This manual is related to the following products: