Flight id reporting, Audio panel and cns – Garmin G1000 Mooney M20TN User Manual

Page 134

Advertising
background image

190-00647-02 Rev. A

Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN

120

AUDIO PANEL AND CNS

SY

STEM

O

VER

VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID

ANCE

AFCS

ADDITIONAL FEA

TURES

APPENDICES

INDEX

FLIGHT ID REPORTING

NOTE:

If the Flight ID is required but the system is not configured for it, contact a Garmin-authorized service

center for configuration.

When the Flight ID must be entered before flight operation, the identifier is placed in the Timer/References

Window on the PFD. The Flight ID is not to exceed seven characters. No space is needed when entering
Flight ID. When a Flight ID contains a space, the system automatically removes it upon completion of Flight
ID entry.

Entering a Flight ID:

1)

Press the TMR/REF Softkey to display the Timer/References Window.

2)

Press the FMS Knob to activate the selection cursor, if not already activated.

3)

Turn the large FMS Knob to scroll down to the Flight ID.

4)

Turn the small FMS Knob to enter the desired Flight ID.

5)

Press the ENT Key to complete Flight ID entry.

If an error is made during Flight ID entry, pressing the CLR Key returns to the original Flight ID entry. While

entering a Flight ID, turning the FMS Knob counterclockwise moves the cursor back one space for each detent
of rotation. If an incorrect Flight ID is discovered after the unit begins operation, reenter the correct Flight ID
using the same procedure.

Figure 4-45 Timer/References Window, Entering Flight ID

Flight ID

PFD Entry

Advertising
This manual is related to the following products: