Split com, Audio panel and cns – Garmin G1000 Mooney M20TN User Manual

Page 139

Advertising
background image

190-00647-02 Rev. A

Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN

125

AUDIO PANEL AND CNS

SY

STEM

O

VER
VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

SPLIT COM

NOTE:

Split COM performance is affected by the distance between the COM antennas and the separation

of the tuned frequencies. If the selected COM1 and COM2 frequencies are too close together, interference
may be heard during transmission on the other radio.

During Split COM operation, both the pilot and the copilot can transmit simultaneously over separate radios.

The pilot can still monitor NAV1, NAV2, ADF, DME, and MKR Audio as selected, but the copilot is only able
to monitor COM2.

Pressing the COM 1/2 Key selects Split COM operation. The COM 1/2 Annunciator is illuminated indicating

Split COM operation. Split COM operation is cancelled by pressing the COM 1/2 Key again, at which time the
annunciator is extinguished.

When Split COM operation is selected, COM1 is used by the pilot and COM2 is used by the copilot. The

COM1 MIC Annunciator flashes when the pilot’s microphone PTT is pressed. The COM2 MIC Annunciator
flashes when the copilot’s microphone PTT is pressed.

COM2 Radio is Used

by the Copilot

Figure 4-51 Split COM Operation

COM1 Radio is Used

by the Pilot

Advertising
This manual is related to the following products: