Terrain-svs page, Hazard avoidance – Garmin G1000 Mooney M20TN User Manual

Page 323

Advertising
background image

190-00647-02 Rev. A

Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN

309

HAZARD AVOIDANCE

SY

STEM

O

VER
VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

Figure 6-53 Navigation Map Page Setup Menu

Figure 6-52 Navigation Map Page Menu

Figure 6-54 Navigation Map Page Setup Menu, Map Group

TERRAIN-SVS PAGE

The TERRAIN-SVS Page is specialized to show terrain, obstacle, and potential impact point data in relation

to the aircraft’s current altitude, without clutter from the basemap. Aviation data (airports, VORs, and other
NAVAIDs) can be displayed for reference. If an obstacle and the projected flight path of the aircraft intersect,
the display automatically zooms in to the closest potential point of impact on the TERRAIN-SVS Page.

Aircraft orientation on this map is always heading up unless there is no valid heading. Two views are available

relative to the position of the aircraft: the 360° default display and the radar-like ARC (120°) display. Map range
is adjustable with the RANGE Knob from 1 to 200 nm, as indicated by the map range rings (or arcs).

Displaying the TERRAIN-SVS Page:

1)

Turn the large FMS Knob to select the Map Page Group.

2)

Turn the small FMS Knob to select the TERRAIN-SVS Page.

Changing the TERRAIN-SVS Page view:

1)

Press the VIEW Softkey.

2)

Press the 360 or ARC Softkey to select the desired view.

Or

:

1)

Press the MENU Key.

2)

Select ‘View 120º’ or ‘View 360º’ (choice dependent on current state) and press the ENT Key to change the view

Advertising
This manual is related to the following products: