Pitch hold mode (pit), Automatic flight control system, Changing the pitch reference – Garmin G1000 Mooney M20TN User Manual

Page 364

Advertising
background image

Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN

190-00647-02 Rev. A

350

AUTOMATIC FLIGHT CONTROL SYSTEM

SY

STEM

O

VER

VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID

ANCE

AFCS

ADDITIONAL FEA

TURES

APPENDICES

INDEX

PITCH HOLD MODE (PIT)

When the flight director is activated (the FD Key is pressed), Pitch Hold Mode is selected by default. Pitch

Hold Mode is indicated as the active pitch mode by the green annunciation ‘PIT’. This mode may be used for
climb or descent to the Selected Altitude (shown above the Altimeter), since Selected Altitude Capture Mode is
automatically armed when Pitch Hold Mode is activated.

In Pitch Hold Mode, the flight director maintains a constant pitch attitude, the pitch reference. The pitch

reference is set to the aircraft pitch attitude at the moment of mode selection. If the aircraft pitch attitude
exceeds the flight director pitch command limitations, the flight director commands a pitch angle equal to the
nose-up/down limit.

CHANGING THE PITCH REFERENCE

When operating in Pitch Hold Mode, the pitch reference can be adjusted by

:

• Using the NOSE UP/NOSE DN Keys

• Pressing the CWS Button, hand-flying the aircraft to establish a new pitch reference, then releasing the

CWS Button

Figure 7-5 Pitch Hold Mode

Selected

Altitude

Pitch Hold

Mode Active

Selected Altitude

Capture Mode Armed

Command Bars Maintain

Desired Pitch Reference

Advertising
This manual is related to the following products: