Garmin GPS 45 - Manual (Page 40)

Once you’ve selected a waypoint from the route
list, choose a menu function:
1. To review the definition page for the waypoint,
highlight the ‘review’ field and press E .
2. To add a new waypoint that precedes the
selected waypoint, highlight the ‘insert’ field
and press the
E key.
3. To remove the selected waypoint, highlight the
‘remove’ field and press the E key.
4. To replace the selected waypoint with a new
waypoint, highlight the ‘change’ field and press
the
E key.
Use the waypoint editing instructions described
earlier (see page 29) for creating a route to com-
plete your changes. If you are editing the active
route (route 0), copy your new route version to an
empty route to save it, as the active route will be
overwritten by a new route activation.
If you add, delete or change the first or last way-
point of a route, the default comment (first and
last waypoint) will automatically be updated after
your changes.
At the beginning of the route section, we men-
tioned that the GPS 45 will automatically select the
route leg closest to your position as the active leg.
This will give you steering guidance to the desired
track of the active leg. If you would prefer to steer
directly towards a route waypoint, you can per-
form an ‘on-route GOTO’ right from the active
route page.
1. Use the U and D keys to highlight the
desired route waypoint and press the G key.
2. Once the Navigation Page appears, press E
to confirm the on-route GOTO waypoint..
32
Reference
Editing Routes
and On-Route
GOTOs
45 manual Rev. B 8/4/98 11:09 AM Page 32