Garmin GPSMAP 376C - Manual (Page 139)

User Timer Expired—the Timer Alarm value has counted down to zero.
Water Speed Sensor is Not Working—the speed sensor is not detected. Check
the connections.
Water Temperature Alarm—sonar has reported a temperature above, below,
inside, or outside the specified value(s).
Waypoint Already Exists—a waypoint with the same name already exists.
Waypoint Memory Full—the unit has stored the maximum number of
waypoints.
XM Connected—the GXM 30 antenna was recently plugged in.
Data Field Options
The following list provides a brief description of each data field
option. Some of these options are supported only by devices
interfaced to your GPSMAP 376C.
Accuracy—the current accuracy of your GPS determined location.
Battery Timer—the time remaining on the battery before it is fully discharged.
Bearing—the compass direction from your current location to a destination.
Course—the desired path of travel from your starting location to a destination.
Course to Steer—the recommended direction to steer in order to reduce cross-
track error and return to the course line. Shown as Steer.
Cross Track—the distance you are off a desired course in either direction, left
or right.
Depth (Marine Only)—the depth of water from sonar NMEA input.
Dest Wpt—see Waypoint (Destination).
Distance (Destination)—the entire distance of a route, from beginning to end.
Distance (Next)—the distance to the next point on a route.
ETA (Destination)—Estimated Time of Arrival. The estimated time you will
reach your destination.
ETA (Next)—Estimated Time of Arrival. The estimated time you will reach the
next point on your route.
ETE (Destination)—Estimated Time Enroute. The estimated time required to
reach your destination.
GPSMAP 376C Owner’s Manual 131
A
PPendIX
> d
AtA
f
Ield
o
PtIons