Connecting the device to your computer, Transferring files to your device, Deleting files – Garmin Oregon 650t User Manual
Page 18: Disconnecting the usb cable, Troubleshooting, Viewing device information, Updating the software, Resetting the device, Registering your device, Getting more information
4
Place the memory card
Á
with the gold contacts facing
down.
5
Close the card holder.
6
Slide the card holder to the right to lock it.
7
Replace the batteries or battery pack.
8
Replace the battery cover, and turn the D-ring clockwise.
Connecting the Device to Your Computer
NOTICE
To prevent corrosion, thoroughly dry the mini-USB port, the
weather cap, and the surrounding area before charging or
connecting to a computer.
Before you can connect the straight connector of the USB cable
to your device, you may have to remove optional mount
accessories.
1
Pull up the weather cap from the mini-USB port.
2
Plug the small end of the USB cable into the mini-USB port.
3
Plug the large end of the USB cable into a computer USB
port.
Your device and memory card (optional) appear as
removable drives in My Computer on Windows computers
and as mounted volumes on Mac computers.
Transferring Files to Your Device
1
Connect the device to your computer (
Your device and memory card (optional) appear as
removable drives in My Computer on Windows computers
and as mounted volumes on Mac computers.
NOTE: Some computers with multiple network drives cannot
display device drives. See your operating system help file to
learn how to map the drive.
2
On your computer, open the file browser.
3
Select a file.
4
Select Edit > Copy.
5
Open the Garmin or memory card drive or volume.
6
Select Edit > Paste.
The file appears in the list of files in the device memory or on
the memory card.
Deleting Files
NOTICE
If you do not know the purpose of a file, do not delete it. Your
device memory contains important system files that should not
be deleted.
1
Open the Garmin drive or volume.
2
If necessary, open a folder or volume.
3
Select a file.
4
Press the Delete key on your keyboard.
Disconnecting the USB Cable
If your device is connected to your computer as a removable
drive or volume, you must safely disconnect your device from
your computer to avoid data loss. If your device is connected to
your Windows computer as a portable device, it is not
necessary to safely disconnect.
1
Complete an action:
• For Windows computers, select the Safely Remove
Hardware icon in the system tray, and select your device.
• For Mac computers, drag the volume icon to the trash.
2
Disconnect the cable from your computer.
Troubleshooting
Viewing Device Information
You can view the unit ID, software version, and license
agreement.
Select Setup > About.
Updating the Software
NOTE: Updating the software does not erase any of your data
or settings.
1
Connect your device to a computer using the USB cable.
2
Go to
3
Follow the on-screen instructions.
Resetting the Device
If the device stops responding, you may need to reset it. This
does not erase any of your data or settings.
1
Remove the batteries.
2
Reinstall the batteries.
Registering Your Device
Help us better support you by completing our online registration
today.
• Go to
• Keep the original sales receipt, or a photocopy, in a safe
place.
Getting More Information
You can find more information about this product on the Garmin
website.
• Go to
.
• Go to
• Go to
Garmin dealer
for information about optional accessories and replacement
parts.
Appendix
Attaching the Carabiner Clip
1
Position the carabiner clip
À
in the slots on the mounting
spine
Á
of the device.
2
Slide the carabiner clip up until it locks in place.
Removing the Carabiner Clip
Lift up on the bottom of the carabiner clip, and slide the
carabiner clip off the mounting spine.
Optional Maps
You can use additional maps with the device, such as BirdsEye
satellite imagery, BlueChart g2, and City Navigator detailed
maps. Detailed maps may contain additional points of interest,
such as restaurants or marine services. For more information,
or contact your Garmin dealer.
tempe
The tempe is an ANT+ wireless temperature sensor. You can
attach the sensor to a secure strap or loop where it is exposed
14
Appendix