Garmin nuLink! 1690 - Manual (Page 4)

 nüvi 1690 Quick Start Manual
5. Plug the other end of the vehicle
power cable into a power outlet in
your vehicle.
6. Fit the bottom of your nüvi into
the cradle.
7. Tilt your nüvi back until it snaps
into place. Your unit should turn
on automatically if it is plugged in
and the vehicle is running. Follow
the on-screen instructions.
Warning: This product contains a lithium-
ion battery. To prevent injury, remove the unit
from the vehicle when exiting or store it out of
direct sunlight.
Acquiring Satellites
1. Go outdoors to an open area,
away from tall buildings and trees.
2. Turn on your nüvi.
Acquiring satellite signals can take a
few minutes. The satellite icon
indicates signal status. When at least
one of the lines is green, your nüvi
has acquired satellite signals.
Finding Points of
Interest
1. Touch Where To? > Points of
Interest .
2. Select a category and a
subcategory.
3. Select a destination, and touch
Go! .
4. If necessary, touch Start to
navigate the route.
To enter letters contained in the
name, touch Where To? > Points of
interest > Spell name .