Garmin GPSMAP 195 - Manual (Page 85)

REFERENCE
To stop the count up or
count down timers, select
the ‘off’ option and press
the
† † key.
The ‘Moving’ option will
only count the elapsed trip
time when your ground
speed exceeds one knot.
83
TIMERS (cont.)
The count up timer measures time from the point at which it was
started. This timer will not generate a message.
To set the general purpose timer to count up:
1. Highlight the timer mode field and press
T
.
2. Select the ‘Count Up’ option and press
T
. The GPSMAP 195 will
begin counting up.
You may also stop or pause the timer as desired.
To stop the timer:
1. Highlight the timer mode field and press
T
.
2. Select the ‘Off’ option and press
T
.
3. To restart the timer, select the ‘Count Down’ or ‘Count Up’ options as
described above.
The battery timer provides a running count of how long your
GPSMAP 195 has been in operation using the batteries. In addition
to the battery gauge, this will provide another indication of how long
a given set of batteries should last. The battery timer is a continuous
count up timer which automatically stops when using external
power. When depleted batteries are replaced with a fresh set, the
GPSMAP 195 will automatically reset the timer to zero. You can also
manually reset the battery timer.
To reset the battery timer:
1. Highlight the battery timer mode field and press
T
.
2. Select the ‘Reset’ option and press
T
.
The GPSMAP 195 features a trip timer which will display the time
enroute. This information can be helpful to maintain your trip
and/or pilot logs.
The trip timer can be configured to run whenever the GPSMAP 195
is powered on, or whenever the ground speed exceeds one knot. The
trip time is cumulative and will not reset automatically when the unit
is powered off and back on. The trip time may be manually reset at
any time during your flight.
To change the trip timer settings:
1. Highlight a trip timer mode field and press
T
.
2. Select ‘On’ or ‘Moving’ and press
T
. If ‘Moving’ is selected, the
timer will run only when your ground speed exceeds one knot.
To reset the departure time/trip timer:
1. Highlight a trip timer mode field and press
T
.
2. Select ‘Reset’ and press
T
.
Main Menu: Timers
gps 195 manual C 7/1/99 4:49 PM Page 83