Garmin GPS II Plus - Manual (Page 78)

72
Find City Page (cont.)
To GOTO the city location from the map:
1. Press GOTO, and then press the ENTER key to activate the GOTO.
To GOTO the city location from the find city page:
1. Highlight ‘GOTO’ at the bottom of the find city page (72a), and press ENTER twice to
confirm.
If you GOTO a city location from the map or find city page, a user waypoint will
be created and added to the user waypoint list.
City Setup Page
The city setup page lets you select the zoom range visible on the map. Cities are
divided into three categories: small, medium, and large. Note: Small cities may not
be visible on the map at high zoom settings.
To set the visible range:
1. Highlight ‘CITY SETUP’, and press ENTER (72b).
2. Select the city size, and press ENTER.
3. Change to the desired range, and press ENTER.
Fig. 72a
Fig. 72b
gps ii + Mon (final?) 2/9/98 4:24 PM Page 72