Garmin GPS 12CX - Manual (Page 26)

18
Track Method
The track ‘method’ option determines how often
positions are stored in the track log. The default setting
is ‘auto’, which records track points based upon a set
variance from your projected course over ground. This
setting provides the most efficient use of track memory
and the best TracBack performance.
To record points based on a specific time interval:
1. Highlight the ‘METHOD’ field, and press ENTER .
2. Select ‘TIME INTERVAL’, and press ENTER twice.
3. Enter hours, minutes, and seconds, press ENTER .
Managing and Clearing the Track Log
The rest of the track setup window displays the per-
centage of available memory currently used to store track
log data, as well as a function field to clear the track log
memory.
To clear the track log:
1. Highlight ‘CLEAR LOG?’, and press ENTER .
2. Highlight ‘Yes?’, and press ENTER .
Note: It’s a good idea to clear the track log at the
beginning of the trail, etc., in order to make the best use
of the TracBack feature (see pg. 8).
R E F E R E N C E
Track Method
& Clearing the
Track Log
Changing the Track Method Changing the Track Method Changing the Track Method Changing the Track Method Changing the Track Method
or
or
or
Clearing the Track Log Clearing the Track Log Clearing the Track Log Clearing the Track Log Clearing the Track Log