Garmin StreetPilot III - Manual (Page 49)

47
System Setup
Reference ‘Time’ Tab
Time Format – Allows you to choose from a 12 or 24 hour time format. When you select the 12 hour
time format, the clock will read like a standard clock with 12 hour AM and PM cycles. The 24 hour
option sets the clock to display a 24 hour cycle (military time).
Time Zone – Can be set to either one of the U.S. time zones, or to any other time zone (by selecting
‘Other’ and entering a specifi c UTC time offset). Refer to the instructions for setting UTC Time Offset
on page 59.
Daylight Savings – Can be turned On, Off, or set to Automatic.
Time, Date, Sunrise and Sunset – Determined by the satellite information being received; cannot be
changed.
‘Safety’ Tab
The StreetPilot III is equipped with a ‘Safe Mode’ feature to improve driver safety. By default, this
feature is enabled, but can be turned off to allow a passenger to operate the unit. When your vehicle
is moving, ‘Safe Mode’ disables the StreetPilot III functions which require signifi cant operator attention
and may become a distraction while driving.
Disabled functions include:
• Map Panning
• All FIND key functions (except Recent List)
• All MENU key functions
• Creating new routes
When you come to a complete stop, these features are automatically re-enabled.
Remember that current date and time are determined by
the satellites and cannot be changed.
The ‘Safe Mode’ can be turned off to allow a passenger to
operate the unit.
190-00256-10_0B.indd 47 1/13/2003, 10:34:10 AM