Bosch GWS 9-125 Professional - Manual (Page 15)

English | 15
Bosch Power Tools 1 609 92A 095 | (30.4.13)
Delivery Scope
Angle grinder, protection guard, auxiliary handle.
Special protection guards, application tools and other acces-
sories shown or described are not part of the standard deliv-
ery scope.
A complete overview of accessories can be found in our ac-
cessories program.
Intended Use
The machine is intended for roughing metal, stone and ceram-
ic materials and for drilling tiles.
For cutting with bonded abrasives, a special cutting guard
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
Together with the hand guard (accessory), the machine can
be used for brushing and grinding/sanding with elastic sand-
ing plates.
The machine is suitable only for working without water.
Technical Data
The technical data of the machine are listed in the table on
page 250–251.
The values given are valid for a nominal voltage [U] of 230 V.
For different voltages and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.
Wear safety glasses/goggles
Movement direction
Apply strength for the workstep.
Low speed
High speed
Switching On
Switching Off
On/Off switch lock-on
Releasing the lock-on function of the
On/Off switch
Prohibited action
Permitted action
Next step of action
P
1
Rated power input
P
2
Output power
n Rated speed
n
v
Speed control adjustment
l = Grinder spindle length
d
1
= Grinder spindle diameter
D = Max. grinding disc diameter
d
2
= Inner disc diameter
Speed preselection
Constant Electronic Control
Kickback stop
Symbol Meaning
d
1
l
d
2
D
Restarting Protection
Reduced starting current
Additional information
Surface grinding
Grinding/sanding with sanding sheet
Weight according to EPTA-Procedure
01/2003 with vibration-damping
auxiliary handle
Weight according to EPTA-Procedure
01/2003 with standard-auxiliary handle
/ II Symbol for protection class II
(completely insulated)
L
wA
Sound power level
L
pA
Sound pressure level
K Uncertainty
a
h
Vibration total value
Symbol Meaning
1
2
OBJ_BUCH-1425-004.book Page 15 Tuesday, April 30, 2013 2:19 PM