Bosch GEX 125-1 AE Professional - Manual (Page 13)

English | 13
Bosch Power Tools 1 609 929 S73 | (30.3.11)
varnish, polyurethane or other chemical materials and when
the sanding debris is hot after long periods of working.
f Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
f Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or less.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for dry sanding of wood, plastic,
metal, filler as well as coated surfaces.
Machines with electronic control are also suitable for pol-
ishing.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 On/Off switch
2 Thumbwheel for orbit frequency preselection
(GEX 125-1 AE)
3 Dust box, complete (Microfilter System)
4 Handle (insulated gripping surface)
5 Sanding plate
6 Sanding sheet*
7 Screws for sanding plate
8 Extraction outlet
9 Filter element (Microfilter System)
10 Vacuum hose*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted sound pressure level of the product
is 77 dB(A). Uncertainty K=2.8 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) determined
according to EN 60745:
Vibration emission value a
h
= 5.0 m/s 2 ,
Uncertainty K = 1.5 m/s 2 .
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for
different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may sig-
nificantly increase the exposure level over the total working
period.
Random Orbital Sander GEX 125-1 A
Professional
GEX 125-1 AE
Professional
Article number 3 601 C87 0.. 3 601 C87 5..
Preselection of orbital stroke rate – z
Rated power input W 250 250
No-load speed n
0
min -1 12000 7500–12000
No-load orbital stroke rate min -1 24000 15000–24000
Orbit diameter mm 2.5 2.5
Sanding plate diameter mm 125 125
Weight according to EPTA-Procedure 01/2003 kg 1.3 1.3
Protection class /II /II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
OBJ_BUCH-315-004.book Page 13 Wednesday, March 30, 2011 8:18 AM