Pioneer PRS-X340 - Manual (Page 13)

12
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
3. Drill 2.5 mm diameter holes at the
point marked, and install the ampli-
fier, either on the carpet or directly
to the chassis.
Fitting the end cap
1. Align the main unit and end cap
holes, and insert the screw.
2. Tighten the screw with a 4 mm
hexagonal wrench (not supplied).
Endcap
Screw
Hexagonal wrench
Drill a 2.5 mm diameter hole
Tapping-screws
(4
×
18 mm)
Floor mat
or chassis