GLOBALSAT TR-151SP - Manual (Page 14)

TR151-SP page 14
4.3 How to set TR151-SP to make GPRS period and
disconnect report?
Users can make TR151-SP to make GPRS periodic and disconnect report by the command
media of SMS or GPRS. What’s different from GPRS periodic report is that for GPRS disconnect
and period report, TR151-SP would disconnect from GPRS server after it sends the periodic
report. For GPRS periodic report (the command start with “?9” and “$9”), TR151-SP would keep
connected to GPRS server after it sends the periodic report.
SMS Command Media for GPRS Disconnect and Periodic Report
?10,IMEI,Report_Interval,Return_Phone_Number!
GPRS Command Media for GPRS Disconnect and Periodic Report
$10,IMEI,Report_Interval!
The table below explains the content of the command.
Format Description
?,$ Start sign and function code
10
IMEI IMEI of TR151-SP
Report_Interval Time interval of sending data report. The unit is second.
Return_Phone_Number The phone number for receiving OK message.
! End sign
TR151-SP will send OK message to the return phone number when the command media is SMS
or to GPRS server when the command media is GPRS to confirm it has received the request.
And then TR151-SP will periodically send its location to the report phone number or/and GPRS
server according to the report interval.
NOTE:
1. The coordinate unit of report format 0 is degree. The coordinates unit of report format 1 is degree
and minute with a 4-digit decimal fraction
Example 1: Require 120-sec period report and return phone number is 6261234567 by SMS command
media