American Magnetics 05200PS-430-601 High Stability Integrated Power Supply System - Manual (Page 186)

168 Rev. 5
Appendix
Power Supply Details
A.12.1 Model 08150PS Single Unit Electrical Specifications
1
Table A-13 lists Model 08150PS electrical and environmental
specifications.
1. Details for the stand-alone units are provided for reference only.
Many of the basic power supply parameters will not apply in the
closed loop current feedback system application with the AMI Model
430 Programmer controlling current in the outer loop.
Table A-13. Model 08150PS Power Supply Specifications
Specification Rating / Description Condition
INPUT CHARACTERISTICS
Voltage (ac)
nominal 110-240 Vac Single Phase.
range 100-255 Vac
Wide Range; contact AMI for opera-
tion to 265 Vac.
Voltage (dc) range 125-420 Vdc No regulatory agency approval.
Frequency
nominal range 50-60 Hz
maximum 45-440 Hz Increased Leakage above 66 Hz.
Power Factor typical 0.99 Meets EN 61000-3-2.
Maximum Input Current
120 Vac 13A rms
Rated load (1200W).
240 Vac 6.5A rms
Inrush Current
265 Vac 40A
Peak
132 Vac 20A
Input Fusing Circuit Breaker 2-line
Low ac Protection Self protected No fixed limits.
Output hold up typical 10 milliseconds Ride through.
Leakage Current
115 Vac, 60Hz 5mA max
230 Vac 50Hz 10mA max
OUTPUT CHARACTERISTICS
Voltage (dc) range 0 to +10 Vdc 1200 W (current limited to 120 Adc)
Current (dc) range 0 to +120 Adc a 1200 W (voltage limited to 10 Vdc)
Type of stabilizer CV/CC Voltage/Current
Adjustment range
voltage 0-100% of rated voltage
No minimum load required.
current minimum to 100% of rated current
Source effect
voltage 0.01% Emax
Over full source range.
current 0.01% Imax
Load effect
voltage 0.01% Emax
Over full load current range.
current 0.02% Imax
Temperature effect
voltage 0.02%/deg C
0-50 deg C
current 0.05%/deg C
Time effect (drift)
voltage 0.05%/24hr
After 30 min warmup.
current 0.05%/24hr
Error sensing 0.25 volts per wire
Above rated output. Contact AMI for
larger margins.