American Magnetics 175 Industrial Level Transmitter (CE-Marked) - Manual (Page 4)

4 of 18
Photo #1
Photo #2
Instrument
Housing
Wiring
Nipple
Probe
Remote Mounting
Bracket
Magnet
Tool
Electronic
Assembly
(“Puck”)
Interconnection
Housing
Probe
Cryogenic storage systems are complex systems with the potential to seriously injure personnel
or equipment if not operated according to procedures. Proper use of safety mechanisms
(pressure relief valves, rupture disks, etc.) included in the cryostat and top plate assembly are
necessary.
Warranty
American Magnetics warranties its products to conform to the specifications described in its
quotation for a period of fifteen months from the date of shipment. AMI makes no other
warranty of any kind, expressed or implied. In the event of failure occurring during normal use,
AMI, at its option, will repair or replace all products or components that fail under warranty and
such repair or replacement shall constitute a fulfillment of all AMI liabilities with respect to its
products. Since, however, AMI does not have control over the installation conditions or the use
to which its products are put, no warranty can be made of fitness for a particular purpose, and
AMI cannot be liable for special or consequential damages. All repairs are F.O.B. Oak Ridge,
Tennessee, USA. If the repairs are covered under this warranty then standard shipping for
return to the customer is paid for by AMI within the USA.
Return Authorization
Before shipping any item to AMI for repair, you must first obtain an RMA number from an
authorized AMI representative. Do not attempt to repair or replace any items without first
speaking to an authorized AMI representative. Doing so may expose the customer to hazards
and will void this warranty. Customers requiring a more comprehensive warranty program may
purchase additional coverage, the price of which may vary by product type.
Introduction
The instructions in this manual pertain to the American Magnetics, Inc. Model 175 Two-Wire
Continuous Level Transmitter. The Model 175 is designed to measure the level of various
liquids, slurries, granular materials, liquid-liquid interfaces, and cryogenic fluids.
The Model 175 is available in two different mounting configurations: integral-mounting with the
probe (see Photo #1), or remote-mounting a maximum of 10 feet from the probe (Photo #2).