American Magnetics 4Q06250PS-430 Integrated Power Supply System - Manual (Page 32)

14 Rev. 5
Installation
Power Requirements
Supply system. Refer to Figure 2-1 for a physical view of the Model
4Q06250PS-430 interconnects.
Refer to Figure 2-2 on page 15. Ensure the cabling is connected in the
following manner 1 :
a. Connect the Master power supply OUTPUT terminal (1) to the
positive magnet current lead (2).
Note
The use of locking hardware is recommended for all high-current
connections.
1. Some connections take more than one cable - read the complete procedure before
beginning.
Figure 2-1. Typical Model 4Q06250PS-430 System Rack Interconnections