Blue Ox BX7460P - Manual (Page 4)

BX7460P
Allure™ Tow Bar
Operation Manual & Installation Instructions
405-0140 Rev G Page 4 of 6 5/14/13
Tow Bar Unhooking & Storing
Figure 1 Figure 2
Figure 3

1. Park the towing vehicle with vehicle in tow, in a straight line, on a flat, level surface to insure minimum
pressure is exerted on the tow bar legs. This will aid in the removal of the 1/2” pins. Engage the towing
vehicle parking brake. Place the towed vehicle either in park for automatic transmissions or securely in first
gear for manual transmissions. Unhook the lighting and safety cables.
2. Disengage the leg latches by pushing down on the locking handles. Remove the quick pin and 1/2” pin
attaching the triple lug to the attachment tab on the passenger side. You may need to tap the 1/2” pin out if
there is still pressure on it (Figure 1).
3. Unhook the pintle ring from the pintle hitch. Bring the passenger side leg over to the driver side and seat
the triple lug onto the support pin of the driver side leg. Pin both legs together with the hair pin provided
(Figure 2).
4. Swing the tow bar towards the passenger side (Figure 3). Attach the pintle ring holding bracket to the
passenger side attachment tab, using the 1/2” pin and quick pin removed earlier (Figure 4).
Note: The tow bar will only store on baseplates with a tab width of 27” or smaller.
Figure 4