Sc9023, Sc9023 installation instructions – Blue Ox SC2100 User Manual
Page 10
TM
© 2011 Blue Ox Division, Automatic Equipment Mfg. Co. • One Mill Road, Industrial Park • Pender,
Nebraska 68047 • Phone 402-385-3051 • Fax 402-385-3360 • www.blueox.com
1. Place the ramp tabs on the deck of the carrier on the
opposite end of the tire stop.
2. Secure the ramps using the included tie down straps.
Fasten one end of the strap to a ramp cross bar and
the other end to the slot on the edge of the deck near
the ramps. Do this to both ramps.
Optional Accessories Installation Information
SC9023
The SC9023 ramps are designed to be used with Blue Ox® SportCarriers I™ and II™ (SC2100 and SC2101). Each
aluminum ramp has a 750 lb. capacity, giving the set of ramps the ability to handle up to 1,500 pounds. The SC9023
ramp kit can easily be stored with the addition of the SC9009 ramp bracket kit.
SC9023 INSTALLATION INSTRUCTIONS
Page 9 of 14
292-2710 Rev A
10/21/11