Concord SLEEPER 2.0 INSTRUCTION MANUAL User Manual
Page 7
Changing the position of the handle
The carrying handle (
01
) has 2 positions, each one of them
has a specific function:
Position 1: Hood folded.
Position 2: Carrying position. Position for fitting and
removing the carrycot from a CONCORD chassis and for
carrying, as well as for use in the vehicle.
To change the position, press the double safety catch and
then the lever (
02
) on the handle and turn the handle (
01
) to
the required position.
27
26
reclining the backrest
The backrest (
14
) of the new CONCORD SLEEPER carrycot
can be automatically adjusted using the adjustment device
(
16
). There are two clear different positions:
Position 1 - AUTO: The backrest will always be in the lowest
position, with the baby always lying down during the journey.
Position 2 - STROLLING: The backrest can be reclined by up
to 20º when it is installed on your CONCORD pushchair or
out of the car.
Ventilation channels
Pressing the button (
09
) on the lower part of the head area
gives you two extra ventilation channels for the hottest
seasons.
_ PriOr ADjUSTmEnTS