DreamGEAR DGWII-1109 - Manual

Set Up:
1. The Twin Charging Dock features 2 charging slots for
your Wii remotes and 2 holding slots for your Wii
nunchucks.
2. Plug your Wii power cable into the Twin Charging
Dock’s power splitter.
3. Plug the male end of the Twin Charging Dock’s power
splitter into your Wii.
4. Replace your Wii remote batteries and battery cover
with the included rechargeable battery packs.
5. Place your Wii remotes and nunchucks into the
appropriate slots. RED glowing effects let you know
that your Wii remotes are charging.
6. When the glowing effects turn BLUE, your Wii remotes
are fully charged and ready for use.
Note: The Wii nunchucks do not have internal power and
the nunchuck slots in the Twin Charging Dock are for
storage and display only.
Rechargeable battery pack note: The battery packs
feature a small “sync” hold for syncing your remotes to
your Wii console without removing the cover.
Twin Charg
ing Dock